Spare parts for grain boxes

  • G1
    Board edges partially chamfered/ corners not cut
    1200 x 100 x 22 mm
    7420.5001
  • G2
    Board edges partially chamfered/ corners not cut
    1200 x 145 x 22 mm
    7420.5002
  • G3
    Crossboard
    800 x 145 x 22 mm
    7102.0401
  • G4
    Wooden board II/III
    1200 x 100 x 22 mm
    7102.0202
  • G5
    Wooden board II/III
    1200 x 145 x 22 mm
    7102.0402
  • G6
    Hardboard 3 mm cut to size
    1199 x 799 x 3 mm
    7620.1006
  • G7
    Wooden block outer runners 100x145x78 mm
    145 x 100 x 78 mm
    7302.0801
  • G8
    Wood block inner curve 145x145x78 mm
    145 x 145 x 78 mm
    7302.0900
  • G9
    KB/ GB corner post 1005 x 70 x 70 mm
    1 longitudinal edge rounded on the inside
    7610.1012
  • G10
    GB longitudinal board 1200 x 159 x 21 mm
    with groove milling
    7620.1010
  • G11
    GB longitudinal board 1200 x 154 x 21 mm
    with groove and comb milling
    7620.1011
  • G12
    GB longitudinal board 1200 x 71 x 21 mm
    with comb milling
    7620.1012
  • G13
    GB hinged board 1200 x 159 x 21 mm
    with tongue milling, groove milling and drilling
    7620.1013
  • G14
    GB hinged board 1060 x 159 x 21 mm
    with groove milling, milling for closure and bore hole
    7620.1014
  • G15
    GB Hinged Board 1060 x 154 x 21 mm
    with groove and comb milling
    7620.1015
  • G16
    GB Hinged Board 1060 x 154 x 21 mm
    with comb and rabbet milling
    7620.1016
  • G17
    GB/ FuMi cross board 428 x 140 x 21 mm
    for flap
    7620.1017
  • G18
    GB/ FuMi Cutout 472 x 67 x 21 mm
    with rebate milling and groove milling for closure
    7620.1018
  • G19
    GB end board 758 x 159 x 21 mm
    with groove milling
    7620.1019
  • G20
    GB end board 758 x 154 x 21 mm
    with groove and comb milling
    7620.1020
  • G21
    GB end board 758 x 71 x 21 mm
    with comb milling
    7620.1021
  • G22
    Box corner 280 x 70 x 70 mm
    for pallet boxes, steel, box red
    8000.1100
  • G23
    Crate hinge steel
    Galvanized, 4 holes 6.5x9mm
    8000.2000
  • G24
    GB Mounting Plate Steel 80 x 40 x 3 mm
    for closure flap
    7620.1024
  • G25
    GB Latch 123 x 63 x 10 mm
    for closure flap
    7620.1025

Order Form for Printing

If you prefer to order on paper, you will find the order form below as a PDF for download.

Order form for grain boxes as PDF